Effect of Hunting on the Reproduction of the Sable Population

Russian Journal of Ecology - Analysis of hunting samples of the Kamchatka sable population for 2001–2013 has revealed changes in the reproductive parameters of females over the period from...     

Global Warming-Related Dynamics of Infection by Eubothrium rugosum (Plathelminthes,Cestoda) in the Burbot from the Rybinsk Reservoir

Russian Journal of Ecology - Abstract—Long-term observations (1968–2019) on the dynamics of infection by the cestode Eubothrium rugosum in the burbot (Lota lota) have been performed in...     

Building Resilience during Recovery: Lessons from Colorado’s Watershed Resilience Pilot Program

The 17 Sustainable Development Goals (SDGs) underpinned by 169 targets presents national governments with huge challenges for implementation. We developed a proposal for a National Blueprint Framework (NBF) with 24 water-related indicators, centered on SDG 6 (clean water and sanitation for all), each with a specific target. We applied the NBF to 28 EU Member States (EU-28) and conclude that:     

A Microscopic Study of Paper Decayed by <Emphasis Type="Italic">Trichoderma harzianum</Emphasis> and <Emphasis Type="Italic">Paecilomyces variotii</Emphasis>

The current study is interested in evaluating the decay of cotton, Whatman and chemical pulp caused by Trichoderma harzianum and Paecilomyces variotii. The structural changes of the paper were evaluated by Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM). The SEM results show differences in hyphae colonization and paper decay patterns between studied species under the current study; P. variotii caused an eroded structure in the cotton (cavity forming), whereas the initial T. harzianum colonization produced rupture and erosion (soft-rot decay type II) for the three types of paper ,the gaps were elongated with sharp pointed ends, which consisted either of individual cavities or in chains. Moreover, FTIR results confirmed that there a relationship could be observed between fungal decay and crystalline cellulose content because the intensity of peaks at 1335 and 1111 cm^?1 significantly decreased due to the fungal decay. Furthermore, the intensity of O–H stretching absorption slightly decreased, and this may be attributed to hydrolysis of cellulose molecules.     

Usability of non-standard lower anchor configurations for child restraint system (CRS) installation

Abstract

Objectives: The objective of this study was to determine whether the amount of tension required for proper child restraint system (CRS) installation varies with lower anchor spacing and to determine whether nonexperts can produce adequate tension on wider-than-standard lower anchor configurations.

Methods: CRSs were installed by certified child passenger safety technicians (CPSTs; n?=?6 subjects, n?=?72 installations) and nonexperts (n?=?30 subjects, n?=?120 installations) on a mock-up vehicle seat fixture with lower anchors set at 11 (standard), 15, 19, and 23 in. apart from one another. Each CPST installed a rear-facing (RF) infant base, RF convertible, and forward-facing (FF) convertible into each of the 4 spacing configurations in random order. The CPSTs were instructed to tighten the lower connector strap until the tension was exactly at the threshold between passing and failing the 1-in. test. Each nonexpert installed one CRS model into all 4 spacing conditions in random order. Nonexperts were instructed to install the CRS to the best of their ability. The tension produced on the lower connector strap was recorded via load cell in the lower anchor assembly of the vehicle seat. Resultant tension magnitudes were compared across spacing conditions using matched pair t-tests. The CPSTs’ mean 1-in. test threshold values were compared to tensions produced by nonexperts. Installations were visually evaluated for errors and qualitative usability feedback was collected via survey.

Results: CPSTs installed the infant base with higher tensions in the 15-, 19-, and 23-in. configurations compared to the standard 11-in. configuration (P = .034, .032, and .003, respectively). The nonexperts installed the infant base with higher tension in the 15- and 23-in. configurations compared to the 11-in. configuration (P = .004 and .026, respectively). The RF convertible and FF convertible installations showed no significant differences in tension among any of the spacing configurations for either group. Only 19% of the nonexperts’ installations were tight enough to pass CPST thresholds, and the pass rate did not vary with respect to lower anchor spacing. In feedback surveys, the nonexpert group did not show a consistent preference for either standard or wider-than-standard lower anchor configurations.

Conclusions: The amount of tension required to pass the 1-in. rule did not vary with lower anchor spacing configurations for the RF and FF convertible CRS, but the infant base required more tension in wider anchor configurations. Nonexperts tended to produce less than ideal tension in all configurations, although their tension magnitudes increased for the infant base in wider configurations.     

Towards saving freshwater: halophytes as unconventional feedstuffs in livestock feed: a review

Water represents 71% of all earth area and about 97% of this water is salty water. So, only 3% of the overall world water quantity is freshwater. Human can benefit only from 1% of this water and the remaining 2% freeze at both poles of earth. Therefore, it is important to preserve the freshwater through increasing the plants consuming salty water. The future prosperity of feed resources in arid and semi-arid countries depends on economic use of alternative resources that have been marginalized for long periods of time, such as halophytic plants, which are one such potential future resource. Halophyte plants can grow in high salinity water and soil and to some extent during drought. The growth of these plants depends on the contact of the salted water with plant roots as in semi-desert saline water, mangrove swamps, marshes, and seashores. Halophyte plants need high levels of sodium chloride in the soil water for growth, and the soil water must also contain high levels of salts, as sodium hydroxide or magnesium sulfate. There are many uses for halophyte plants, including feed for animals, vegetables, drugs, sand dune stabilizers, wind shelter, soil cover, wetland cultivation, laundry detergents, and paper production. This paper will focus on the use of halophytes as a feed additive for animals. In spite of the good nutritional value of halophytes, some anti-nutritional factors as nitrates, nitrite complexes, tannins, glycosides, phenolic compounds, saponins, oxalates, and alkaloids may be present in some of them. The presence of such anti-nutritional agents makes halophytes unpalatable to animals, which tends to reduce feed intake and nutrient use. Therefore, the negative effects of these plants on animal performance are the only objection against using halophytes in animal feed diets. This review article highlights the beneficial impact of considering halophytes in animal feeding on saving freshwater and illustrates its nutritive value for livestock from different aspects.     

Air Quality Modeling Using the PSO-SVM-Based Approach,MLP Neural Network,and M5 Model Tree in the Metropolitan Area of Oviedo (Northern Spain)

The main aim of this study was to construct several regression models of air quality using techniques based on the statistical learning, in the metropolitan area of Oviedo, in northern Spain. In this research, a hybrid particle swarm optimization-based evolutionary support vector regression is implemented to predict the air quality from the experimental dataset (specifically, nitrogen oxides, carbon monoxide, sulfur dioxide, ozone, and dust) collected from 2013 to 2015 in the metropolitan area of Oviedo. Furthermore, a multilayer perceptron network (MLP) and the M5 model tree were also fitted to the experimental dataset for comparison purposes. Finally, the predicted results show that the hybrid proposed model is more robust than the MLP and M5 model tree prediction methods in terms of statistical estimators and testing performances.     

Effects of meteorology on ground-level ozone (GLO) concentrations and identifying the hot spots having significantly higher GLO concentration in a semi-urban area

The present study aims to analyse the influences of five meteorological parameters (temperature, wind speed, barometric pressure, rainfall, and solar radiations) on ground-level ozone (GLO) concentrations over the region of Ranchi Municipal Corporation (Jharkhand, India). The diurnal variation of GLO concentration and the meteorological parameters were analysed in each month to understand the associations. The results indicated that the correlation coefficients of GLO concentration with SR, AT, and DPT are found to be positive in each month and also statistically significant. But, the association between WS and GLO concentration was not uniform between the study days. Furthermore, the study also demonstrates an approach for identifying the hot spots that are having the higher level of GLO concentration. The hot spot maps were produced for each month to understand the shifting of the locations of hot spot locations. The results reveal that the hot spot locations are changes frequently in each case. Since the hot spot analysis was conducted with limited data, the presented hot spots are indicative and dependent on the meteorological conditions of the specific period and cannot be considered as a robust epidemiological study.     

Modification of Thermo-Mechanical Properties of Recycled PET by Vinyl Acetate (VAc) Monomer Grafting Using Gamma Irradiation

Vinyl acetate (VAc) monomer of different percentage was grafted onto the recycled polyethylene terephthalate (r-PET) films using gamma irradiation. The properties of these modified films were characterized by Fourier transform infrared spectroscopy (FTIR), mechanical properties testing (Tensile strength, Elongation at break), dynamic mechanical analysis (DMA) and thermo-gravimetric analysis (TGA). The Tensile Strength (TS) of the modified PET film increased by 132.25?% to the highest value of 50.12 MPa at 15% VAc monomer concentration at 3 kGy gamma dose, while the elongation at break (EB) decreased by 31.83?%. FTIR was used to investigate the molecular interaction of the modified films. TGA revealed that curve of the modified PET film shifted toward higher temperature region by 95?°C, which is very close to that of PET film made from virgin flakes. The results indicate that modified PET films of better mechanical and thermal properties were successfully prepared using VAc monomer grafting by gamma irradiation technique.     

Spatial Distribution of Heavy Metals and <Superscript>137</Superscript>Cs in Spruce Forest Soil under Conditions of Regional Pollution

The influence of horizontal structure of spruce forest on the spatial distribution of acid-soluble Zn, Cd, Pb compounds and ¹³⁷Cs in the litter and the humus horizon of soddy podzolic soil has been studied in the territory with the regional background level of industrial fallout. It has been found that the distribution pattern of Zn in the forest litter is a result of biogeochemical processes. The litter in fern–wood sorrel microplots contains increased amounts of Zn and Cd, while the contents of Pb and ¹³⁷Cs are decreased. The distribution patterns of Pb and ¹³⁷Cs in the litter are positively correlated with each other, since both elements are deposited from the atmosphere, and similar mechanisms account for their redistribution in the spruce forest ecosystem.